SECTION 11685
COPYCAM PRO
IMAGE CAPTURING SYSTEM

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Image Capturing Systems and Accessories.

1.02 RELATED DOCUMENTS

A. Related Work Specified Elsewhere:

1. Section 10100 - Visual Display Surfaces.
2. Section 09260 - Gypsum Board Assemblies, Concealed Supports in Metal Stud Walls.
3. Section 09900 - Paint and Coatings.
4. Division 16 - Electrical.
5. Section 01230 - Alternates.

1.03 SUBMITTALS

A. Shop Drawings: From approved manufacturer for each Image Capturing System required. Include plan view locations, elevations, installation details, and accessories.

B. Product Data: Submit manufacturer’s technical data, product specifications, installation instructions, and other pertinent information as applicable for each product or material specified.

C. Operating and Maintenance instructions for each product.

D. Samples of Manufacturer’s standard and extended Warranties.

1.04 QUALITY ASSURANCE

A. Single Source Responsibility: Obtain all materials from one source, from a single approved manufacturer for each different product required.

B. All materials are to be installed by an authorized representative of the manufacturer.

C. Certification: CE, FCC, Bluetooth Certified

1.05 DELIVERY, STORAGE AND HANDLING

A. Take care in handling products in accordance with manufacturer’s instructions.

B. Store inside in original undamaged packaging, in a well-ventilated area protected from weather, moisture, soiling, extreme temperatures, and humidity. Store products in secure, protected area. Verify with manufacturer that site conditions are acceptable before receiving material.

1.06 WARRANTY

A. Manufacturer’s standard one-year limited warranty.

B. Provide information on available extended warranties.

PART 2 PRODUCTS

2.01 MANUFACTURERS

Required items shall be CopyCamTM Pro Image Capturing System by PolyVision Corporation Norcross GA. Other manufacturers will be considered, providing equipment meets or exceeds the quality specified, and they can provide equipment of the type, size, and function required.

2.02 IMAGE CAPTURING SYSTEM

A. Digital color image capturing system capable of working with any existing or new whiteboard or chalkboard. No computer needed. No software required.

B. CopyCamTM Pro, model 80, wall mounted system includes: camera arm: 38” length weighing 3.5 lbs., control box: 8.25” wide x 7.25” high x 2” deep, weighing 1 lbs., and wireless, color printer.

1. Compatible with any computer with a web browser: WindowsÒ, MacintoshÒ, or Linux, etc.
2. File Export Format: PNG (.png)
3. Information is saved to the board’s web browser, floppy drive, or printed at the push of a button. Saved images are accessible via the user’s intranet and transferred from the board’s web browser to a personal computer for permanent storage, e-mail, fax, printing or uploading to the world-wide web.

C. Camera Arm

1. Average 3.5 Megapixels resolution.
2. Captures line drawings and writing in any color.
3. Captures up to a 4’ x 8’ surface
4. Enhances contrast for crystal clear copies.
5. Automatically crops to board borders.
6. Built-in Web Server

A. Holds approximately 40 images
B. Can be accessed from anywhere on a LAN using standard web browser.
C. Images are retained even when power loss is experienced.
D. Supports fixed IP addressing or DHCP protocol.

7. “Tilt-up” mounting bracket for control arm.
8. Jacks for power, LAN, and control pad.

D. Control Pad

1. 3-button interface allows direct capture to printer, diskette, or built-in Web server.
2. Disk drive writes images to a standard IBM PC 3.5” formatted HD diskette.
3. Voice prompts and 3-color LED provide status.
4. One button set up.

E. Printer

1. Wireless Bluetooth-enabled color printer.
2. Operates up to 25’ from camera arm.

F. Accessories Included:

1. 120V, 60 Hz, power adapter with 15’ cord.
2. 15’, 100-baseT Ethernet cable.
3. 10’ cable from arm to control pad.
4. 24’ of cable raceway in 4’ sections.
5. Mounting templates.
6. Installation Manual.
7. User’s Guide

PART 3 – EXECUTION

3.01 EXAMINATION

A. Examine room conditions and wall surfaces to assure they are in compliance with requirements and other conditions affecting installation and operation of image capturing systems. Do not proceed with installation until unsatisfactory conditions have been corrected.

3.02 INSTALLATION

A. Install units in locations and at mounting heights indicated and according to manufacturer’s written instructions. Provide all accessories necessary for a complete installation.

3.03 ADJUSTING AND CLEANING

A. Verify that accessories required for each unit have been properly installed.

B. Clean units according to manufacturer’s written instructions.

END OF SECTION

For other product specifications, select a product from the drop-down menu.